#712 HO Scale Split Shank 3/4 size Old Time Plastic Couplers - Rust

#712 HO Scale Split Shank 3/4 size Old Time Plastic Couplers - Rust

This 3/4 size coupler has an extended Trip Pin mounted on a narrow gauge coupler to use with light duty old time equipment. The #711 & #712 works with Kadee's® full size HO-Scale Couplers. With this smaller coupler, gathering will not be as great nor can they bear the same loads as Kadee's® HO Couplers. They should easily handle loads common to the pre-1900 era.

This industry leading coupler features a plastic coupler and coil centering spring and comes complete with a insulated draft gearbox and lid. The #712 Magne-Matic® Split Shank Couplers may be body mounted on any flat surface; HO-Scale locomotives or rolling stock.
(The #702 Coupler Assembly Fixture can be used to ease assembly)

It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage.

Unassembled Kit

#712 Instructions

Rust colored

Two pair per package

UPC: 765484007128

  Made in the U.S.A.

HO-Scale

0-48 or 0-80 screws are the most commonly used screws.
Screw length will very depending on the mounting situation.

Package Includes:

• (2) Pair Unassembled Split Shank Couplers
• (2) Pair Unassembled Gearboxes & Lids
• (5) Each #712 Trip Pins
• (6) Each #636 Centering Springs
• (4) Each #402 Self Tapping Screws 0-48 x 1/4"
  
  

Recommended Tools:

• #206 Coupler Height Gauge
• #231 Greas-em Dry Graphite Lubricant
• #237 Coupler Trip Pin Pliers
• #239 Mark V Gripper
• #240 Double Headed Pin Vise
• #241 Dual Tool

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

WARNING: CHOKING HAZARD - Small Parts - Not for children under 14 years.

Kadee Quality Products Co. products are not toys and are not intended for children under 14 years old.